Any modern linear luminaire is first and foremost a LED luminaire.
The design of the lamp is very primitive and yet very aesthetically pleasing and reliable. As they say: "everything is brilliantly simple!
In this article we will tell you:
Now there are a huge number of companies that sell aluminum LED profile. A huge selection and low prices make it possible to use it almost anywhere.
Profile mounted on: liquid nails, masking tape, screws.
There are many ways to build a profile into a wall/ceiling/tabletop...
Special fasteners, liquid nails, mounting mesh, self-tapping screws.
Recessed profiles are equipped with lugs (ears). They hide the irregularity of the groove and prevent the profile from falling through.
The suspended LED profile is hung on special cables. Current from an external voltage source is supplied either by wires or a separate cable.
There are profiles in which the power supply is mounted.
Despite the fact that the profile product is quite primitive, there are many nuances that indicate the quality of this product.
In addition to the aesthetic component, the profile serves as a heat sink for the LED module.
The key to long LED life is good cooling.
Many manufacturers in an effort to reduce the cost begin to make the profile is not made of high quality alloy AD-31, and from other cheaper materials. This is very detrimental to the rigidity of the case, as well as on the quality characteristic of heat capacity and thermal conductivity.
When choosing an aluminum profile, make sure it is stiff (usually a quality profile is weighty - heavy)
Polycarbonate screen is a protective cover for LED modules. The polycarbonate screen also has the important function of diffusing light without absorbing it.
When selecting a LED module, it is worth considering the power and location of the luminaire.
Approximately 80-100W LED light will be needed for a good illumination of a 20 sq.m. room with a 3m high ceiling. This is taking into account that about 20% of the light is absorbed by the screen.
For reliability, we recommend using Japanese LED strips HOKASU (https://ulight.ru)
To assemble the linear luminaire, you will need the following tools:
First you need to determine the length of the light and, if necessary, cut the aluminum profile to the right size.
Next you need to install the HOKASU LED modules and solder them to each other.
We want to note that if necessary, you can install modules in 2 or more rows.
After installation and inspection, you need to snap the screen shut and install the end caps.
The light fixture is ready!
21.12.2022
You will find 3D models of all lamps in the product card
